Accessories
Temperature controller, oven, & IR sensing card
Temp. control set
Temperature control set is specifically designed for thermal management of different kind of non-linear crystals including bulk and waveguide such as PPLN, PPLT, PPKTP, KTP and etc. Temperature controller, TC-038D, goes along with different ovens (OV-30D, OV-50D, WG OVENs) with extreme temperature tunability up to 200 deg. C and stability. TC-038D is programmable, with the common I/O interface through USB connection.
Chip Mounting
HCP provides both standard and customized holders to support your handling of nonlinear crystals. Together with our oven and temperature controller, the chip holder provides required temperature uniformity.
IR sensing card
HCP provides various unique IR sensing cards (Infrared Visualizers; Infrared Viewer; Laser Viewing Cards; Near Infrared (NIR) Sensor Cards) with PVC laminated to prolong the lifetime. OEM/ODM orders with your own company logo and design are also welcome.
Temperature controller (TC-038D) & Oven
- PID control
- Auto-tuning & programmable
- Tuning step: 0.1°C
- Temperature stability: ±0.1°C
- Temperature tuning range: ambient temp. to 200°C
- Storage temperature: -20°C to 70°C
- Maximum power consumption: 24V/60W
- Communication Interface: USB2.0 (can be used on USB3.0 port)
- GUI program included
- Dimension: 150(L) x 90(W) x 65(H) mm^3
- Oven options: OV-30D (~203g) or OV-50D (~380g)
- TC-038D: ~900g
- CE, RoHS/REACH compliance
- Excellent temperature stability
- Manual with mechanical drawing download
Temperature stability at 50 degrees Celsius
Temperature stability at 190 degrees Celsius
PPLN chip holder
Different chip holders designed to load nonlinear crystals especially PPLN/PPLT are available: regular types, femto series and WG. The regular chip holders have variable Teflon clips to hold chips with arbitrary width ranging from 1mm to 40mm and are compatible with our oven OV-30D, OV-50D or OV80D.
The Femto series PPLN chip (extreme short PPLN) will be shipped on mount with CD type (~3g) or fs 9605/9610/1410.
WG holder is specially designed for waveguide chips operated with Oven set to allow lens to be very close to waveguide channel facet for easy coupling.
IR sensing card
-Infrared Visualizers, Infrared Viewer, Laser Viewing Cards, NIR Sensor Cards
View, locate and analyze CW Lasers, Pulsed Lasers, and IR Laser Diodes
HCP-HP-0520
- Ideally designed for pulsed lasers (800~1600nm)
- Damage threshold >10MW/cm^2 intensity (1064nm, 7ns, 5kHz)
- Featured with one holding hole for easy handling
- Edge-to-edge design for easy alignment
- No optical recharging is required
- Metal Aluminum base
HCP-IR-1201
- 2-in-1 card - Reflective & Transmissive (see laser from back side)
- High sensitivity down to uW/cm2 level in dark
- Large active region up to 85.5 mm x 54 mm
- Edge-to-edge design for easy alignment
- Durable and portable ISO standard PVC card
- Wide wavelength coverage from 800 to 1600 nm
- Could be cut into small pieces for use as showed left
HCP-SHG-0602
- Designed for pulsed lasers (800~1600nm)
- Durable and portable ISO standard PVC card
- Wide wavelength coverage from 800 to 1500 nm
